RAD Data comm 100 Spécifications télécharger pdf (Page 103)

Installation and Operation Manual Chapter 4 Configuration

Egate-100 Ver. 4.0 Configuring Egate-100 for Management 4-11

Table

4-7. Host Encapsulation Parameters

Parameter Description Possible Values

Host Tagging The Host Tagging mode:

• Untagged: The host transmits and receives only untagged

frames. In VLAN-Aware mode, the host bridge port must be

set to Stripping.

• Tagged: The host transmits VLAN-tagged frames and

receives only frames tagged with the same VLAN ID as that

of the host.

Default: Untagged

Untagged

Tagged

Host VLAN ID Sets the VLAN ID of the packets sent by the host. This

parameter only shows when Host Tagging is set to Tagged.

Default: 1

1-4094

Host Priority Tag Quality of Service priority tag for packets sent by the host. This

parameter only shows when Host Tagging is set to Tagged.

Default: 0

0–7

Configuring SNMPv3

Egate-100 supports SNMP version 3 entity, providing secure SNMP access to the

device by authenticating and encrypting packets transmitted over the network.

Configuring the SNMP Engine ID

Engine ID is an alphanumeric string used for identification of the Egate-100 agent

in the SNMPv3 environment. The engine ID must be unique to allow the user to

query the SNMP engine. It must be defined prior to enabling SNMPv3

functionality. The length of the string is up to 27 characters.

³ To define the SNMP engine ID:

1. Navigate to the SNMP Engine ID menu (Configuration > System >

Management > SNMP Engine ID),

2. Select Remaining Bytes and define the value of the engine ID section

reserved for user SNMP engine identification.

The value is automatically translated in hexadecimal format and displayed

in the read-only Engine ID field.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 317 318

Pas de commentaire

RAD Data comm 100 Spécifications Page 103