RAD Data comm FCD-IP Manuel d'utilisateur télécharger pdf (Page 25)

RADview FCD-IP User’s Manual Chapter 2 System Management

OSPF 2-11



To disable OSPF:

1. Select Configuration > OSPF > Parameters….

The OSPF Parameters dialog box appears.

Figure 2-11. OSPF Parameters (Disable)

2. In the Admin Status field, select Disable.

3. Click <Set> to implement the changes.

The following confirmation message appears:

“This operation will cause Restart of the device /n Connection with Agent

will be lost.”

4. Click <OK>.

Table 2-6. OSPF Parameters

Parameter Possible Values / Remarks

Admin Status Enable/Disable

Router ID The IP address format.

Required if OSPF is enabled.

Not available is OSPF is disabled.

Redistribute Routers Enable/Disable

Not available is OSPF is disabled.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 109 110

Pas de commentaire

RAD Data comm FCD-IP Manuel d'utilisateur Page 25