RAD Data comm IPmux-11 Spécifications télécharger pdf (Page 42)

Chapter 2 Installation and Setup Installation and Operation Manual

2-2 Connecting the Ethernet Equipment IPmux-11 Ver. 2.00

2.3 Package Contents

The IPmux-11 package includes the following items:

• One IPmux-11 unit

• Power cord

• IEC 60320 AC/DC adapter plug

• CBL-DB9F-DB9M-STR control port cable (if ordered)

• CBL-RJ45/2BNC/E1/X adapter cable for unbalanced E1 interface (if ordered)

• RM-33-2 rack mount kit (if ordered).

2.4 Connecting the Ethernet Equipment

IPmux-11 is connected to the Ethernet network equipment via the fiber optic LC

or 8-pin RJ-45 electrical port designated ETH 1. Connection to the Ethernet user

equipment is made via two 8-pin RJ-45 electrical ports designated ETH 2 and

ETH 3. Refer to Appendix A for the RJ-45 connector pinout.

Connecting the Ethernet Network Equipment

Figure 2-1 and Figure 2-2 illustrate typical rear panels of the IPmux-11 unit with

fiber optic LC and electrical RJ-45 network connectors, respectively.



To connect to the Ethernet network equipment with fiber optic interface:

• Connect IPmux-11 to the Ethernet network equipment using a standard fiber

optic cable terminated with an LC connector.

CONTROL

EXT CLK E1

ETH

123

SET

DEF

Figure 2-1. ETH 1 Fiber Optic Connector



To connect to the Ethernet network equipment with a copper interface:

• Connect IPmux-11 to the Ethernet network equipment using a standard

straight UTP cable terminated with an RJ-45 connector.

CONTROL

EXT CLK E1

ETH

123

SET

DEF

Figure 2-2. ETH 1 Electrical Connector

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 147 148

Pas de commentaire

RAD Data comm IPmux-11 Spécifications Page 42