RAD Data comm Optimux-34 Spécifications télécharger pdf (Page 73)

Installation and Operation Manual Chapter 4 Configuration

Optimux-34 Ver. 2.81 Configuring Optimux-34 for Operation 4-15

Configuration>Physical Layer>E3

1. Device Number > (Local)

2. Port Number (LINK A)

3. Port Name ... ()

4. Alarms (Unmasked)

Please select item <1 to 4>

ESC-prev.menu; !-main menu; &-exit 1 user(s)

Figure

4-16. E3 Menu

Table

4-12

describes the Local and Remote Uplink menu (see

Figure

4-16

Table

4-12. E3 Values

Field Description Possible Values Visibility

Device Number The device number Remote

Local

Always

Port Number E3 port number

LINK B

LINK A

Always

Port Name Sets a name for the port containing up to

15 characters.

Alarms Masks UpLink alarms

Masked

Unmasked

Always

2. Select Device Number option and set the device to either Local or Remote.

3. Select Port Number to set the E3 port number to either LINK A or LINK B.

4. Select Port Name to set a name for the port.

5. Select Alarms to mask or unmask the Uplink alarms.

Configuring the E1 Port

The E1 option in the Physical Layer menu is for the configuration of the E1 ports.

³ To configure the E1 port:

1. From the Configuration menu, select Physical Layer> E1.

The E1 menu is displayed.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 117 118

Pas de commentaire

RAD Data comm Optimux-34 Spécifications Page 73