Rad-data-comm TDMoIP Gateway IPmux-16 Manuel d'utilisateur Page 66

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 99
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 65
Chapter 3 Operation IPmux-16 Installation and Operation Manual
3-34 Configuring IPmux-16
Bundle Connection Configuration
Main Menu
2. Configuration
3. Bundle
Connection
Configuration
To view and configure Bundle Connection parameters:
Type 3 (Bundle Connection Configuration) in the Configuration menu.
BUNDLE CONNECTION CONFIGURATION
1. DS0 Bundle ID 1
2. Connection Status Enable
3. Destination IP Address 10.10.10.10
4. Next Hop 192.168.238.1
5. Destination Bundle 1
6. Jitter Buffer (x10 usec) 300
7. TDM bytes in frame 48
ESC. Exit D. Delete N. Next
SYSTEM USAGE: 6.25 %
Select item from the menu.
Use <ESC>-key or keys <1> to <7>
Figure 3-32. Bundle Connection Configuration
Parameters must be configured for each connection. To configure all parameters,
first select the bundle ID and then proceed with the parameter configuration.
To set the source DS0 Bundle ID:
1. Type 1.
2. Type in the bundle ID: 1 to 496.
The bundle should be defined first.
To set the Connection Status:
1. Type 2.
2. Use the <Spacebar> on your keyboard to toggle between Enable and
Disable.
When set to Disable, frames will not be sent on this connection.
Destination IP Address
1. Type 3.
2. Enter the IP address of the destination device (IPmux-16).
Note
Vue de la page 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 98 99

Commentaires sur ces manuels

Pas de commentaire