RAD Data comm Optimux-34 Informations techniques télécharger pdf (Page 44)

Chapter 4 Configuring Typical Applications User’s Manual

4-6 Configuring Optimux-34 Optimux-34 Ver. 2.81

Parameter Possible Values / Remarks

Clock Source Internal

LBT

Changing the Clock Source from Internal to LBT takes about 2 minutes. A

confirmation message is displayed announcing “Changing Clock Source to LBT

may take about 2 minutes”, click <OK> or <Cancel> to acknowledge.

Read-Write for the Local device

Configuring SNMP

You can configure SNMP settings to specify the management station(s) that can

transmit or receive Optimux-34 traps.

 To configure SNMP:

1. On the menu bar, click Options > Manager List (see

Figure 3-4

Figure 4-5. Manager List Dialog Box

2. Change the IP addresses, as required.

3. You can elect not to send traps to a selected address by clearing the relevant

Send Traps check box adjacent to that address.

4. Click <Set> to implement the change.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 81 82

Pas de commentaire

RAD Data comm Optimux-34 Informations techniques Page 44