RAD Data comm E1 Spécifications télécharger pdf (Page 63)

Installation and Operation Manual Chapter 4 Configuration

MiTOP-E1/T1 Ver. 1.0 Configuring MiTOP-E1/T1 for Operation 4-15

Table

4-3. PSN Parameters

Parameter Function Values

PW Number Number of pseudowire connection 1

PW Name User-defined name of the PW. This parameter is

configured via the PW menu (

Figure

4-14

PW Name 1

PW Type Defines encapsulation type used for PW creation (see

Figure

4-15

)

CESoPSN, SAToP

PW Reordering Controls the packet reordering function Enable – Packet reordering is

enabled

Disable – Packet reordering is

disabled

Default: Enable

ToS Defines the ToS bit value 0-255

Default: 0

VLAN Tagging Controls the use of VLAN tagging Enable – VLAN tagging is enabled

Disable – VLAN tagging is disabled

Default: Disable

VLAN Priority Defines VLAN priority value if VLAN tagging is enabled

0–7

Default: 0

VLAN ID Defines VLAN tag value if VLAN tagging is enabled 0–4095

Default: 1

Ingress Label Defines the ingress MPLS tunnel label

(PSN to MiTOP-E1/T1 direction). Valid for MPLS

networks only.

16–65535

Default: 16

Egress Label Defines the egress MPLS tunnel label

(MiTOP-E1/T1 to PSN direction). Valid for MPLS

networks only.

16–65535

Default: 16

EXP Bits Defines the EXP bits value to be used for outgoing

traffic. Valid for MPLS networks only.

0–7

Default: 0

TTL Defines time-to-live value for the PW. Valid for MPLS

networks only.

0–255

Default: 0

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 117 118

Commentaires sur ces manuels

Pas de commentaire

RAD Data comm E1 Spécifications Page 63

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau RAD Data comm E1