RAD Data comm MBE10-8D Spécifications télécharger pdf (Page 39)

MBE Family Installation and Operation Manual Chapter 3 Operation

Operating Instructions 3-3

Power-on



To power-up MBE:

1. Set the POWER switch on the rear panel to the ON position.

The POWER indicator lights up, indicating that MBE is powered on. After

about 1 minute, the operational status screen appears on the terminal

screen.

2. Press the <Enter> key several times to display the password prompt.

Operating MBE



To operate MBE:

1. Configure MBE according to the application (see the LAN RANger Series

Configuration Guide).

2. During normal operation (when the remote workstations are active):

 The READY indicator lights up continuously

 The Tx and Rx indicators blink occasionally

 The LAN and LINK error indicators remain OFF.

Power-off



To power-off MBE:

• Set the POWER switch on the rear panel to the OFF position.

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610

www.bestdatasource.com

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 49 50

Pas de commentaire

RAD Data comm MBE10-8D Spécifications Page 39