RAD Data comm Megaplex-2104 Spécifications télécharger pdf (Page 20)

Module Installation and Operation MP-2100 HS-R

Installation and Operation Manual

2-2 Preparation for Installation

2.2 Preparation for Installation

The HS-R modules have two jumpers that control the connection of the frame

ground to pin 1 in the channel connectors.

Default setting: pins connected to frame ground.

Figure 2-1 shows the location of the two jumpers for the HS-R. Note that the

modules include additional factory-set jumpers that must not be changed by the

user.

Jumper J3

Frame Ground not

Connected to Pin 1

of CH.1-2 Connector

FGND

Frame Ground

Connected to Pin 1

of CH.1-2 Connector

Jumper J4

Frame Ground not

Connected to Pin 1

of CH.3-4 Connector

FGND

Frame Ground

Connected to Pin 1

of CH.3-4 Connector

FGND

FGND SEL 1

FGND

FGND SEL 2

Figure 2-1 HS-R Internal Settings

Module Installation

Refer to the system installation plan and insert the module in the assigned I/O slot

of the Megaplex enclosure. The module starts operating as soon as it is plugged

into an operating enclosure.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Pas de commentaire

RAD Data comm Megaplex-2104 Spécifications Page 20