RAD Data comm TDMoIP Gateway IPmux-16 Spécifications Page 57
- Page / 117
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
IPmux-4 Installation and Operation Manual Chapter 5 Application Configuration Procedures
IPmux-1 5-9
E1/T1 Configuration
➤
To configure E1/T1:
1. From the Main menu, select 2 Configuration.
2. From the Configuration menu select 2 E1/T1 Configuration (refer to
Figure 5-3).
3. Select Transmit Clock and choose Adaptive.
4. Select Line Type and choose CRC4 Disable.
5. Select Signaling Mode and choose CAS Disable.
6. Press <S> to save the configuration.
7. Press <Esc> a number of times to return to the Configuration screen.
Remember to press <Enter> after modifying each parameter. Press <S> to save
all changes on the menu.
DS0 Bundle Configuration
➤
To create the bundles:
1. From the Configuration menu select 5 DS0 Bundle Configuration (refer to
Figure 5-4).
2. Select Time slot number and enter 1 – 10.
3. Select Time slot Current Status and choose Set.
4. Press <S> to Save.
5. Press <Esc> to return to the Configuration screen.
Remember to press <Enter> after modifying each parameter. Press <S> to save
all changes on the menu.
Bundle Connection Configuration
➤
To link the bundles to IPmux-4:
1. From the Configuration menu select 3 Bundle Connection Configuration
(refer to Figure 5-5).
2. Select Connection Status and choose Enable.
3. Select Destination IP Address and enter the IP Address of IPmux-4.
4. Select Next Hop and enter the next hop router IP address (this parameter is
only necessary if the Destination IP Address is not in the same subnet as this
Main Menu
↓
2. Configuration
↓
2. E1/T1
Configuration
Note
Main Menu
↓
2. Configuration
↓
5. DS0 Bundle
Configuration
Note
Main Menu
↓
2. Configuration
↓
3. Bundle
Connection
Configuration
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com
- IPmux-4 1
- Warranty 2
- Regulatory Information 2
- Safety Warnings 3
- Telecommunication Safety 3
- Declaration of Conformity 4
- Contents 5
- Table of Contents 6
- List of Figures 7
- List of Tables 8
- Chapter 1 9
- Introduction 9
- Features 10
- Overview 1-3 11
- Internal Cross Connect 12
- Standards 12
- General 12
- 1.2 Physical Description 13
- 1.3 Functional Description 14
- Operation Modes 15
- Testing 15
- Timing Modes 15
- Network Timing Schemes 16
- Frame Format 17
- 1-10 Functional Description 18
- Packet Delay Variation 19
- PDVT (Jitter) Buffer 20
- Ethernet Throughput 21
- Frame)TDM(Bytes/ 22
- )Overhead(% = 22
- Round Trip Delay 23
- 1.4 Technical Specifications 24
- Ethernet 25
- Modules 25
- 1-18 Technical Specifications 26
- Chapter 2 27
- Installation 27
- 2.3 Package Contents 28
- 2.4 Equipment Needed 28
- Equipment Needed 2-3 29
- 2.5 Installation and Setup 30
- Grounding 31
- Location of Connectors 31
- Connecting the Control Port 32
- Caution 33
- 2-8 Installation and Setup 34
- Chapter 3 35
- Operation 35
- 3.3 Operating Instructions 36
- User Name and Password 37
- 3.4 Getting Started 38
- Navigating 39
- 3.6 Configuring Parameters 40
- Main Menu 41
- 2. Configuration 41
- Performance Monitoring 42
- Chapter 4 43
- Troubleshooting and 43
- Diagnostics 43
- Table 4-1. Event Types 44
- 4.2 Troubleshooting 45
- 4.3 Diagnostic Tests 46
- T1 FDL Support 47
- T1 PRM Support 47
- 4-6 Diagnostic Tests 48
- Chapter 5 49
- Application Configuration 49
- Procedures 49
- Guidelines 50
- Configuration Summary Table 51
- 5.2 IPmux-1 52
- Host IP Address 53
- E1/T1 Configuration 53
- IPmux-1 5-7 55
- 5.3 IPmux-4 58
- Configuration 59
- IPmux-4 5-13 61
- Authentication/Community 62
- Manager List 63
- Alarms Trap Mask 64
- Default Gateway 64
- Appendix A 67
- Boot Sequence for 67
- Downloading Software 67
- A-2 Booting IPmux-4 68
- Accessing the File System 69
- A-4 Booting IPmux-4 70
- Appendix B 71
- SNMP Management 71
- MIB Structure 72
- SNMP Environment B-3 73
- SNMP Communities 74
- Authentication 74
- Network Management Stations 74
- Appendix C 75
- Telnet Operation 76
- System Security 76
- Warning 77
- Preliminary Procedure 78
- Checking the Download 79
- Appendix E 81
- Parameters and Screens 81
- General Information 82
- Self-Test Results 83
- Logfile Events 84
- E.2 General Configuration 85
- ASCII Terminal Configuration 89
- Time/Date Update 90
- Set Default Parameters 90
- X-Modem 91
- E.3 System Configuration 93
- Order from: Cutter Networks 100
- DS0 Bundle Configuration 102
- E.5 LAN Configuration 103
- E1/T1 Statistics 105
- LAN Statistics 109
- Table E-17. LAN Statistics 110
- Bundle Connection Status 111
- Connecting the DC Plug 117
Produits connexes et manuels pour Passerelles/contrôleurs RAD Data comm TDMoIP Gateway IPmux-16
(6 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.014 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels