RAD Data comm ASMi-52 Manuel d'utilisateur télécharger pdf (Page 45)

Installation and Operation Manual Chapter 3 Operation

ASMi-52 Ver. 2.5 Configuration Alternatives 3-9

Managing ASMi-52 via Ethernet Port

ASMi-52 is equipped with an Ethernet/Fast Ethernet port (10/100BaseT) which

enables communication with ASMi-52 management subsystem using the IP

protocol (see Figure 3-9). The Ethernet management port is configured for a LAN

cross-over connection.



To prepare ASMi-52 for network management:

1. Connect a LAN network management station to the ASMi-52 Ethernet port

designated 10/100BaseT.

Configure the host IP parameters of the ASMi-52 unit via an ASCII terminal.

Run an SNMP management application, such as RAD’s RADview, open a

Telnet session, or manage ASMi-52 via ConfiguRAD.



To start the ConfiguRAD session:

1. Start a Web browser.

2. Disable any pop-up blocking software, such as the Google Popup Blocker.

3. Enter the IP address of the ASMi-52 in the address field of the browser in the

following format: http://<IP address> and then press <Enter> to command

the browser to connect (IP address stands for the actual ASMi-52 IP address

which has to be assigned via an ASCII terminal).

4. In the Login screen, click LOGIN to start the ConfiguRAD management

session.



To choose an option:

1. Click a link in the ConfiguRAD screen to display the next menu.

2. Once the target screen is displayed, select a value from the drop-down box.

Figure 3-8. ConfiguRAD Login

Managing ASMi-52 via a Dedicated Timeslot

ASMi-52 modems with E1 or T1 interface can be managed via a dedicated E1/T1

timeslot (DTS) (see Figure 3-9).

The DTS is a management channel that connects directly to the ASMi-52 host

using a separate IP interface, i.e., separate IP address and IP mask. If the LAN and

dedicated timeslot services are configured to have the same IP, the management

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 185 186

Pas de commentaire

RAD Data comm ASMi-52 Manuel d'utilisateur Page 45